LAUNCH CNC605 Ultrasonic Gdi 110V 220V Fuel Injector Cleaner and Tester For Gasoline Injector

LAUNCH CNC605 Ultrasonic Gdi 110V 220V Fuel Injector Cleaner and Tester For Gasoline Injector

CNC605 launched by SmartSafe, is a Injector Cleaner and Tester suitable for GDI, EFI, SFI and other injectors. The injector can be cleaned and tested by simulating the engine condition. It can also be used to clean the fuel injector ad fuel supply system on the vehicle without disassembly. It is ideal for repair and maintenance service centers!

1. Powerful ultrasonic cleaning to completely remove the carbon deposit on the fuel injection nozzle.
2. Uniformity and spray ability test.
3. Sealing test has tested the sealing and leakage of the fuel injection nozzle under a certain pressure.
4. Injection volume test ensures the nozzle continually spray for a certain time and test the injection volume of the nozzle.
5. Realize EFI & SFI cleaning without disassembling the nozzle.
6. Automatic mode can automatically test the fuel injection nozzle through the preset program.

Item
1. Ultrasonic cleaning：Clean injectors to remove the carbon deposition on them completely
2. Uniformity/sprayability test：To test the uniformity of injecting amount of each injector, and to monitor the spraying status of
each injector with the help of backlight
3. Leakage test：To test the sealing and dribbling conditions of injectors under system pressure
4. Injection volume test：To check the injecting amount of the injector in 15 seconds of constant injection
5. Auto. test：To test injectors by preset program conditions
6.On-vehicle cleaning：On-vehicle cleaning to remove the carbon deposition on vehicle
7.Setting：To set the system language
8.Inquire：To check the equipment usage information
9. Information：To check the hardware and software version

Power Supply
AC 110V/220V, 50Hz/60Hz
Main Engine Power
350W
Ultrasonic Power
60W
Fuel Pressure
0.1~10 bar
Air Inlet Pressure
5~8 bar
RPM
100~990rpm, Step: 100rpm
PW
0.5~25.0rpm, Step: ms
Timer Range
1~30min
Tank Capacity
~3L
Item
Description
√
Ultrasonic cleaning
Clean injectors to remove the carbon deposition on them completely
√
Uniformity/sprayability test
To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of
backlight
√
Leakage test
To test the sealing and dribbling conditions of injectors under system pressure
√
Injection volume test
To check the injecting amount of the injector in 15 seconds of constant injection
√
Auto. test
To test injectors by preset program conditions
√
On-vehicle cleaning
On-vehicle cleaning to remove the carbon deposition on vehicle
√
Setting
To set the system language
√
Inquire
To check the equipment usage information
√
Information
To check the hardware and software version